[HomeAssistant] Install Hass.io

Writed: 03 Mar 2020

 

Index

1. Hardware

2. Install balenaEtcher

3. Download Hass.io

4. Flash Hass.io

5. Make Account

6. Install Samba share

7. Connect Samba server

8. Install Terminal & SSH

9. Connect SSH

1. Hardware

1) Raspberry Pi 3B+

2) SD Card 32GB

* Home Assistant Doc recommand at least a 32GB SD card

 

2. Install balenaEtcher

https://www.balena.io/etcher/

balena - The complete IoT fleet management platform

3. Download Hass.io

https://www.home-assistant.io/hassio/installation/

Installing Home Assistant

4. Flash Hass.io

1) Flash the download image to an SD card using balenaEtcher

2) Select Image and Flash

3) After finish the Flash, Insert the card to RaspberryPi 3B+

4) Wait for a few minutes, Wire LAN is the faster than wireless Wifi

 

5. Make Account

1) Connect Raspberry Pi. Check the device's IP via Router

6. Install Samba share

7. Connect Samba server

1) Input Home Assistant IP

8. Install Terminal & SSH

9. Connect SSH

 

Reference

https://www.home-assistant.io/hassio/installation/

Installing Home Assistant